Sigmetrix EZtol v3.2.2 full patch notes

MCKINNEY, Texas – May 27th, 2026 – Sigmetrix, experts in mechanical variation management , announced their release of EZtol v3.2.2. This new version fixes known bugs in the standalone version of EZtol as well as EZtol for SolidWorks.

EZtol streamlines 1D tolerance stack-up analysis, making it easy for engineers to quickly calculate, visualize, and validate tolerance impacts without relying on error-prone spreadsheets. The result is faster design cycles, more accurate assemblies, and lower manufacturing risk. 

EZtol v3.2.2 and EZtol for SOLIDWORKS 

Fixed a results calculation issue in certain situations of assembly shift bias

• In some situations where unequal bilateral tolerances are used and the model contains assembly shift between
  features of size with clearance; the application was incorrectly calculating the results if the assembly shift was
  biased to either minimize or maximize. This issue has been fixed.

   

Fixed an issue where additional tolerance associated with material modifiers was applied incorrectly

• In some situations where features of size are controlled by geometric tolerances that include material modifiers
  (MMC or LMC), and those features are involved in assembly shift biased to either maximize or minimize, the
  associated additional tolerance was applied incorrectly. The additional tolerance was being shown in the stackup
  table and included in the calculated results as equal bilateral, when it should be shown as unilateral. This issue
  has been fixed.

Sigmetrix’s comprehensive, integrated portfolio includes other products and services including: 

• CETOL 6σ, a 3D tolerance analysis solution that works directly with NX, SOLIDWORKS, PTC Creo and CATIA V5-6 models. 
• EZtol, a 1D tolerance analysis software that works directly with NX, SOLIDWORKS, and CATIA V5-6 models. The same technology is used in PTC Creo’s EZ Tolerance Analysis (EZTA) tool and Autodesk Inventor’s Tolerance Analysis tool. 
• GD&T Advisor, an interactive tool that provides expert guidance on the correct application of GD&T within the PTC Creo and Autodesk Inventor environments. 
• Training  provided through more than a dozen instructor-led and computer-based courses covering basic to advanced GD&T/GPS, MBE, tolerance analysis, and instructional courses for software developed by Sigmetrix. 
• Consultation and implementation  services team with years of experience in tolerance analysis and GD&T definition offers a variety of consulting services to augment your team, speed your project along and run analyses for your assemblies.

About Sigmetrix 
Sigmetrix has been helping companies produce better solutions for over 25 years through a combination of software solutions, training, and consulting services that focus on managing the impact of mechanical variation. For more information, visit their website at https://www.sigmetrix.com.