Computer-Based Training Courses


Our Computer-Based Courses have been developed to make learning at your own pace easy and intuitive. The user portal contains all of the content in one window, the module outline listed on the right side of screen allows for easy navigation and ability to review some of the more complicated points as needed, users can swap video and slides at any time, plus there is a mobile app for iOS and Android which allows users to save courses and take them offline.

Level 1 GD&T Fundamentals Computer-Based Training (CBT) Course

A thorough and rigorous treatment of the system of Geometric Dimensioning and Tolerancing concepts, rules, legal implications, tools and techniques are presented in detail from design, inspection, and concurrent engineering points of view. (ASME)

  • Understand shortcomings of +/- dimensioning and tolerancing and how GD&T eliminates these deficiencies 
  • Introduction to functional dimensioning and tolerancing 
  • Detailed explanation of datums and datum reference frames 
  • Start with GD&T rules and simple concepts and build up to system level 
  • Features, features of size, geometric tolerances and tolerance zones are covered in detail 
  • Leads to a thorough understanding of GD&T basics 
  • Presented from design, manufacturing, quality, inspection, and assembly points of view 

BUY NOW     CONTACT US FOR PRICING & DETAILS     VIEW VIDEO PREVIEW     ACADEMIC PRICING


ISO Geometrical Product Specifications (GPS) Fundamentals Computer-Based Training (CBT) Course

Geometrical Product Specifications contains several rules, concepts, tools, and techniques that, without proper guidance on implementation, can be overwhelming and confusing. This course seeks to provide a thorough review of GPS from multiple points of view, including design, inspection, and engineering.

 Topics include:

  • Understanding the shortcomings of +/- dimensioning and tolerancing, and how GPS eliminates these deficiencies
  • Introduction to functional dimensioning and tolerancing
  • Detailed explanations of datums and datum systems
  • Implicit and explicit features, features of size, geometric tolerances, and tolerance zones
  • Separate sections devoted to detailed explanations of controls for form, orientation, location, run-out, and profile tolerance symbols
  • Review of material requirements and how they impact the associated tolerance zones
  • Coverage of general tolerances, workpiece edge specifications, surface texture and finish, as well as pattern tolerancing

The course includes a total of 16 modules with accompanying lecture videos and interactive quizzes, allowing students to assess their understanding of the material.

BUY NOW     CONTACT US FOR PRICING & DETAILS     VIEW VIDEO PREVIEW     


Advanced Topics in GD&T Computer-Based Training (CBT) Course

The Advanced Topics in GD&T Computer-Based Training (CBT) course continues the coverage of Geometric Dimensioning and Tolerancing concepts and techniques by building upon the content of the Level 1 GD&T Fundamentals Course.  It combines the lecture portions of the two Instructor-led courses offered by Sigmetrix – Level 2 G&D Applications and Level 3 Advanced GD&T courses. The content is arranged to progress from individual features, expand on datum theory and tools, then progress through interrelationships of features and specialized tolerancing tools and available in the ASME Y14.5-2009 standard.

Topics discussed include:

  • Additional considerations for features of size
  • Constraint-based explanation of tolerance zones
  • Additional discussion of MMC, LMC, MMB, and LMB applications
  • Methods and examples of controlling Coaxiality
  • Composite, and Multiple Single Segment, Position and Profile tolerances
  • Multiple Datum Feature Concepts (coaxial datums, coplanar datums, etc.)
  • Material Boundary Modifiers applied to Features of non-size
  • Per-unit-area and per-unit-length tolerances
  • Restrained Condition and Free State Symbols, including best practices for specifying restraint
  • Customized Datum Reference Frames and where they offer best value

BUY NOW     CONTACT US FOR PRICING & DETAILS


ASME Y14.5-2018 GD&T Update Computer-Based Training (CBT) Course

The Advanced Topics in GD&T Computer-Based Training (CBT) course continues the coverage of Geometric DThe latest ASME Y14.5-2018 Standard contains many clarifications and improvements. This course highlights the most significant of these changes and provides answers to your questions on new, changed, and deleted content as compared to the previous revision (ASME Y14.5-2009). It is recommended for design, mechanical, manufacturing, quality, process and project engineers, CAD specialists, and inspectors.

BUY NOW CONTACT US FOR PRICING & DETAILS


MBE Overview Computer-Based Training (CBT) Course

Model-Based Enterprise (MBE) is a business practice primarily focused on the use of digital data and subsequent datasets. To support an MBE, various model-based activities (MBx) are typically implemented, such as model-based definition (MBD) or model-based systems engineering (MBSE). The goal of being able to produce, consume, and utilize digital data both upstream and downstream can be achieved with proper implementation and preparation. 

This course is an introduction to MBE. No prior knowledge or understanding is needed. Students will be guided through various topics discussing what an MBE is, why it matters, and how it can be supported. Model-based definition is also discussed, and MBD schemas are introduced to provide a basis for structuring data within an MBE. Students can expect to finish the course with a general knowledge of MBE, MBD and Product Lifecycle Management (PLM). The goal of this course is to provide learners with enough knowledge to make informed decisions regarding MBE and MBD, while feeling confident about adopting a model-based enterprise. 

BUY NOW     CONTACT US FOR PRICING & DETAILS


CETOL Fundamentals Computer-Based Training (CBT) Course

Version: CETOL v10.4 for CATIA, Creo, NX, and SOLIDWORKS” with “CETOL for CATIA, Creo, NX, and SOLIDWORKS 

Learn the fundamentals of CETOL 6σ at your own pace. This computer-based course allows students to complete the same curriculum as our instructor-led course but at a schedule that can be balanced with other work demands. The course consists of:   

  • 15 modules including an overview of worst-case and statistical analysis concepts, the CETOL 6σ user interface, fundamental statistics, variation inputs, best practices for assembly analysis modeling, functional dimensioning including GD&T, the complete tolerance analysis modeling process, modeling validation, results interpretation, and reporting     
  • Lectures are presented with a “talking head” and relevant slides 
  • Demonstrations of software functionality and workflow are presented via video. 
  • Exercises with detailed instructions let the user apply the concepts just presented to “learn by doing.”   
  • Quizzes at the end of modules allow students to ascertain their grasp of the concepts and revisit material when needed.   
  • Two delivery options are available – browser-based portal when connected and mobile app for iOS and Android allowing users to save courses and take them offline 

The Instructor-led presentation of this material includes several hours of instruction-led application of the concepts, Sigmetrix strongly encourages students receive a minimum of  6 hours of 1:1 time with a Sigmetrix instructor through the purchase of specialized virtual consulting accompanying this course

CONTACT US FOR PRICING & DETAILS


EZtol Fundamentals Computer-Based Training (CBT) Course

Version: 2.1 

Learn the fundamentals of PTC Creo GD&T Advisor at your own pace. This computer-based course allows students Learn the fundamentals of EZtol at your own pace. This computer-based course allows students to complete the same curriculum as our instructor-led course but at a schedule that can be balanced with other work demands. The course consists of

  • 11 units ranging describing all aspects of the tool including some more advanced applications of GD&T
  • 7 units ranging from a brief over of worst-case and statistical analysis concepts, introduction to the software, to detailed explanations of functionality and workflows
  • Two delivery options are available – browser-based portal when connected and mobile app for iOS and Android allowing users to save courses and take them offline
  • Exercises with detailed instructions let the user apply the concepts just presented to “learn by doing”
  • Quizzes at the end of modules allow students to ascertain their grasp of the concepts and revisit material when needed
  • Training manual in ebook format

BUY NOW     CONTACT US FOR PRICING & DETAILS


PTC Creo GD&T Advisor Fundamentals Computer-Based Training (CBT) Course (ASME) 

Version: Creo 4.0-8.0 

Learn the fundamentals of PTC Creo GD&T Advisor at your own pace. This computer-based course allows students to complete the same curriculum as our instructor-led course but at a schedule that can be balanced with other work demands. The course consists of   

  • 11 units ranging describing all aspects of the tool including some more advanced applications of GD&T.   
  • 2 delivery options are available – browser-based portal when connected and mobile app for iOS and Android allowing users to save courses and take them offline.  
  • Exercises with detailed instructions let the user apply the concepts just presented to “learn by doing.”  
  • Training manual in ebook format  

BUY NOW     CONTACT US FOR PRICING & DETAILS


PTC Creo EZ Tolerance Analysis Fundamentals Computer-Based Training (CBT) Course

Version: Creo 4.0-6.0 

Learn the fundamentals of PTC Creo EZ Tolerance Analysis at your own pace. This computer-based course allows students to complete the same curriculum as our instructor-led course but at a schedule that can be balanced with other work demands. The course consists of   

  • 7 units ranging from a brief over of worst-case and statistical analysis concepts, introduction to the software, to detailed explanations of functionality and workflows.   
  • 2 delivery options are available – browser-based portal when connected and mobile app for iOS and Android allowing users to save courses and take them offline.  
  • Exercises with detailed instructions let the user apply the concepts just presented to “learn by doing.”  
  • Quizzes at the end of modules allow students to ascertain their grasp of the concepts and revisit material when needed.  
  • Training manual in e-book format  

BUY NOW     CONTACT US FOR PRICING & DETAILS


Enterprise Computer-Based Training

Our Computer-Based Courses have been developed to make learning at your own pace easy and intuitive. The user portal contains all of the content in one window, the module outline listed on the right side of screen allows for easy navigation and ability to review some of the more complicated points as needed, users can swap video and slides at any time, plus there is a mobile app for iOS and Android allows users to save courses and take them offline.

Content:

  • Basic and Advanced GD&T concepts – two courses
  • Applying GD&T to Creo models using GD&T Advisor witin PTC Creo
  • 1D Tolerance Analysis tool, PTC Creo EZ Tolerance Analysis
  • 3D Tolerance Analysis with CETOL
  • Overview of Model Based Enterprise (MBE)

Deployment options:

  • Add content to existing corporate Learning Management System (LMS)
  • Utilize Sigmetrix LMS solution with custom “branch” for your team
    • Your administrators can manage settings for your users
    • Custom reports permits as much detail as desired or limited by law
    • Recommended learning plans (course sequences) based on job function
  • Multiple language support

Flexibility for employees:

  • Learn as time permits
  • Sigmetrix system maintains progress to pick back up where the student stopped
  • View courses on computer or download to tablet or phone for viewing content on the go

CONTACT US FOR PRICING & DETAILS


Get a Quote or Contact Sigmetrix at info@sigmetrix.com